ENGINEERING INSIGHT

The $2,800 Wellness Equipment Audit That Taught Me the Real Cost of 'Buy and Forget'

2026-11-17 - Klara Voss

We bought all the right equipment. That was the problem.

I'm the procurement manager at a 140-person software company in the Pacific Northwest. I handle facilities, office equipment, and — since 2022 — the employee wellness budget. In Q3 2024, I ran a full audit of our equipment spending for the previous 18 months. Total: $14,200 across 38 items.

What I found was that we'd spent roughly $2,800 on devices that were either underused, misused, or purchased for scenarios we'd never actually verified. Not broken. Not returned. Just... wasted. Sitting in drawers, running suboptimally, or voiding their own warranties through neglect.

That's the moment it clicked for me: the purchase price is the smallest part of the cost. The real cost is what happens — or doesn't happen — after the box is opened.

First, the obvious stuff: nobody reads manuals

We own eight Theragun devices across four office locations — mostly Minis for the quiet rooms, a couple of Prime models for the fitness area. Great products. Seriously. But when I pulled the usage logs from our room-booking system, I noticed something: the massage guns in buildings where the theragun mini manual had been left in the box were used 40% less often than the ones where somebody had actually skimmed the quick-start guide and taped it inside the cabinet door.

Not because the manual changed the device. Because it changed behavior. People knew what attachments to use, how long to run a session, which muscle groups to target. Without that, the device feels intimidating. Uncertain. So it stays in the drawer.

Here's the thing: Theragun's app and website actually have decent tutorials. But the average employee isn't going to hunt for them. The manual is the on-ramp. Skip it, and you've bought a $199 device that sits idle.

Then there's the warranty registration gap

This one stung. Out of eight Theragun units we purchased, only two had completed the theragun warranty registration process. The rest were still covered under the standard window from purchase date — but a year later, when one of the Minis developed a battery issue, we had no easy way to prove purchase date or ownership without digging through three different inboxes.

We got it sorted (thankfully — the finance team had archived the original order confirmation). But it took six emails and two weeks. A five-minute registration at the time of purchase would have eliminated that entirely.

Now, I know what you're thinking: that's an administrative problem, not a procurement problem. Fair. But here's my argument — from a total-cost-of-ownership (TCO) perspective, administrative friction is a cost. Every hour I spend chasing warranty claims is an hour I'm not negotiating supply contracts. At my fully-loaded hourly rate, that two-week saga cost the company about $310 in my time alone. On a $199 device.

"That's not a device problem. That's a process problem. And process problems are exactly what procurement is supposed to catch."

The deeper problem: we never asked whose job the follow-through was

This wasn't about the Theragun. Or the massage gun companies whose products we compared before buying. It wasn't even really about wellness equipment at all.

It was about a systemic assumption baked into how we buy things: someone else will handle the details.

We bought an hvac mini split system for our server room in spring 2023. Great unit. The installation company was solid. But nobody added the quarterly filter cleaning to our facilities calendar. Nobody logged the warranty end-date. Eighteen months later, when the system started short-cycling, the first thing the technician asked was whether the filters had been maintained. We couldn't prove they had. That's a $180 service call that should have been a $12 filter.

Same pattern. Different device.

And it compounds. Because when you don't track one device, you don't track the next one either. By the time I ran the audit, we had HVAC units, massage guns, and a break-room appliance all existing in this weird administrative limbo — bought, installed, and then forgotten.

And then there's the 'better choice' trap

I want to bring up one more example, because it's the one that made me rethink our entire purchasing approach.

In early 2024, we debated whether to replace our break-room blender with a cold press juicer. The team sent around articles asking is cold press juicer better than centrifugal, better than blending, better for nutrient retention. We spent three meetings on it.

You know what we never did? Check how many people actually used the blender. Answer: four people, three times a week, mostly for smoothies.

A $450 cold press juicer would have been the 'better' choice in the abstract. It would have been the wrong choice for our actual usage pattern. We bought a $120 blender instead. The old one still works, by the way — it's now a backup.

Looking back, I should have pulled usage data before we started the comparison. At the time, the question felt urgent because everyone had an opinion. But urgency isn't the same as importance. That's a lesson I keep relearning.

What this cost us, in numbers

I'll be honest — not every number here is dramatic. But they add up:

  • $310 in my time chasing a warranty claim that should have been pre-registered
  • $180 service call for a filter that was never cleaned on schedule
  • ~$800 in underused Theragun inventory (two units never left the box)
  • $330 in extra comparison-shopping time on the juicer debate
  • ~$1,200 in devices purchased for 'what if' scenarios that never materialized

Total: roughly $2,800. Not catastrophic. But this is a 140-person company. Scale that pattern up to a 1,400-person company and you're looking at $28,000 in quiet, boring waste.

(Note to self: build that TCO calculator I keep talking about.)

The fix is embarrassingly simple

Here's what we changed, effective Q4 2024:

  1. 15-minute unboxing protocol. Whoever receives a device reads the manual, takes a photo of the key pages, and tapes the quick-start inside the storage location. Sounds ridiculous. Cut our 'unused device' rate from 22% to 6%.
  2. Auto-register warranties the same day. No exceptions. We added a line to our purchasing checklist. If it has a serial number, it gets registered before it gets deployed.
  3. Usage data before comparison. Before evaluating any replacement or upgrade, we pull actual usage numbers. If the current device is used less than twice a week, we default to repair, not replace.
  4. Assign one owner per device category. Not a committee. One person. TheraGun units belong to the wellness coordinator. HVAC belongs to facilities. If something breaks or needs maintenance, there's exactly one name on the sheet.

Could we have done this two years ago? Yes. But given what I knew then — nothing about how devices actually get used in a shared environment — my mistakes were pretty standard. The point isn't to be perfect. The point is to stop paying for the same lesson twice.

One honest limitation

This approach works for shared equipment in a structured environment. If you're buying Theragun devices for personal use, you don't need a 15-minute unboxing protocol — you need to remember to register the warranty and actually open the manual. That's it. Don't overcomplicate it.

And if you're already doing all of this? Then you're not the problem. You're the person I'm trying to catch up with. Send me your spreadsheet.

Klara Voss

Klara Voss

Klara Voss is a smart-appliance and component-systems analyst specializing in connected hubs, plugs, switches, locks, lighting controls, motors, compressors, heating elements, sensors, door seals, power modules, and controllers. She applies IEC 60730-1, IEC 60669-2-1, IEC 62368-1, and IEC 62233 while comparing standby power, control accuracy, wireless range, reconnect time, update recovery, motor efficiency, winding temperature, seal compression, leakage, and fault response. Her guides help OEMs, component buyers, product engineers, and brand teams manage platform compatibility, mains requirements, firmware lifecycle, assembly tolerances, spare-parts planning, and supplier changes.

← Theragun FAQ: What 42 Units and $1,100 in Mistakes Taught Me About Buying Massage GunsTheragun Mini vs Theragun Relief: A Procurement Manager's Total Cost Breakdown (and Why Sharper Image Isn't Actually Cheaper) →

Discuss this topic with Irobot