ENGINEERING INSIGHT

I Ordered 12 Theraguns for Our Office Wellness Room. Here's the One Thing I Wish I'd Checked First.

2026-11-10 - Duncan Price

How a Tuesday email turned into a two-month procurement project

In March 2023, our HR director forwarded me an email with the subject line "Wellness Room — Phase 2." I'm the office administrator for a 280-person company, and I've handled procurement here since 2020 — pretty much every purchase that isn't payroll, roughly $400,000 a year across about 20 vendors. The email said the company had approved a $6,000 budget to turn an unused conference room into a recovery space: foam rollers, yoga mats, and "those massage gun things the athletes use."

I'd never bought a massage gun in my life. I had, however, bought a lot of things that looked simple and turned out not to be. So I did what I always do: I made a spreadsheet and started verifying.

The research phase: Theragun Pro Plus vs Pro, and Prime vs Pro

The brand was decided for me, basically. Our CEO had a Theragun at home and wanted "the good ones." So my job was to figure out which models actually made sense for a shared office setting. The two comparisons that kept coming up in every review I read were the Theragun Pro Plus vs Pro, and the Theragun Prime vs Pro comparison.

Here's what I found — and I'm going from memory and my own notes, so don't quote me on exact specs:

  • Theragun Pro — the workhorse. Five speeds, deeper amplitude, longer battery, and a display screen. Heavier. Geared toward serious users.
  • Theragun Pro Plus — the Pro with thermal attachments (heat and cold). More "clinical" feel. More expensive. Honestly overkill for a shared room.
  • Theragun Prime — lighter, still five speeds, simpler interface, no display screen. Cheaper. Easier for a shared-device setting where people don't read instructions.

For a 280-person office, the Pro Plus seemed like too much. The thermal head is a nice feature, but in a room where nobody's reading a manual, I worried about attachments walking off. So I ordered six Pros and six Primes — enough for two stations and a lending supply. Total came in just under $5,500 including tax, which left a little room in the $6,000 budget for rollers and mats.

(Should mention: I did check the Theragun site for specs and pricing before ordering. Per theragun.com, as of March 2023, the Pro was listed around $599 and the Prime around $299. Prices may have changed since — verify current pricing at theragun.com.)

The problem I didn't see coming

The order shipped fast — three days. That was the good news. The bad news arrived in the same box: two of the Pros were missing the standard ball attachment, and one of the Primes had a battery that wouldn't hold a charge past about 20 minutes.

Here's where I want to be honest with you. I'd spent maybe eight hours researching which model to buy. I spent zero minutes reading the return and warranty policy. I just assumed it worked like the rest of my purchases — if something's wrong, you send it back.

It's not that simple. Buying direct from Theragun means going through their warranty claim process, which is fine but not instant. Buying from a third-party retailer means dealing with that retailer's return window — and one of my units came from a big-box store with a 30-day window and an original-packaging requirement. I'd already recycled the boxes. That was a $299 mistake I had to eat out of the department budget.

I still kick myself for not reading that policy first. If I'd spent 10 minutes on the returns page before clicking "buy," I'd have known to keep every box and receipt in the storage closet until the return window closed. Instead, our wellness room launch slipped two weeks while I sorted out replacements.

Had about 48 hours before the launch date to decide whether to push forward with 9 working units or delay. Normally I'd wait for the full set, but HR had already announced the opening to the whole company. Went with the 9 and borrowed two from a sister office. In hindsight, I should have built in a buffer — ordered 13 or 14 instead of 12, or waited one more week before announcing. But with the CEO's calendar already blocked for the ribbon-cutting, I made the call with what I had.

What we actually put in the room

Launch day arrived. We had 9 massage guns, a stack of foam rollers, and a laminated card at each station that I wrote after about three hours of reading — one side was massage gun guidelines, the other a simple sequence for how to roll out your back with a foam roller (upper back, lats, lower back, 30–60 seconds each, breathe). I printed it on cardstock because I knew people wouldn't read a PDF.

We also had to be careful with the language on that card. Our legal team flagged a draft that called the guns "pain relief devices." Per FTC guidance (ftc.gov), health-related claims need to be truthful and substantiated — and we had no business making medical claims for a shared office device. So we reworded everything to "muscle recovery" and "post-workout tension." The card now says, in bold, that the guns are not a substitute for medical treatment.

That was probably the single most valuable hour of the whole project — the hour we spent on wording. Prevention over cure, right?

The lesson I keep relearning

The wellness room has been running for almost two years now. Utilization is high — I refill the sanitizing wipes twice a week and we've had to add a sign-up sheet for peak hours. The Pros get used more than the Primes, which surprised me. People like the heavier feel. Go figure.

Looking back, I should have built a simple 12-point check before any purchase over $500: verify the return window, verify the warranty terms, verify what's in the box, verify the retailer's replacement policy, confirm serial numbers on arrival. That checklist would have caught the missing attachments before I recycled the boxes. It took me three years and maybe 150 orders to understand that the "checking" phase isn't overhead — it's the actual job.

And it applies to everything, not just wellness equipment. Last winter our water heater finally gave out, and I had to find a repair company in Rochester on a Friday afternoon. If I'd run the annual maintenance check I'd been putting off, I'd have caught the failing element months earlier. Same story with the server room — I spent a weekend watching DIY mini split installation videos, convinced I could save us a couple thousand dollars, before realizing the same principle applied: check the codes, check the specs, or pay someone who will.

Bottom line: 5 minutes of verification beats 5 days of correction. I know that now. I wish I'd known it before I recycled those boxes.

Duncan Price

Duncan Price

Duncan Price is a household cleaning appliances analyst covering corded, cordless, stick, handheld, wet-dry, and robot vacuums, carpet cleaners, floor scrubbers, steam mops, and window-cleaning robots. He applies IEC 62885-2, IEC 62885-4, IEC/ASTM 62885-7, and IEC 60335-2-54 while comparing airflow, suction, dust pickup, filtration, runtime, charge time, navigation coverage, obstacle recovery, water recovery, steam output, noise, and brush endurance. His work helps retailers, appliance brands, floor-care specialists, and procurement teams compare cleaning performance, battery platforms, consumables, maintenance, floor compatibility, mapping behavior, storage, and after-sales cost.

← When 40 Massage Guns Needed to Arrive in 48 Hours: A Theragun Mini vs Relief StoryTheragun Pro Plus vs Pro vs Prime: Which Model Actually Fits Your Situation? →

Discuss this topic with Irobot